Boss Gt 100 User Manual Pdf

  

  1. Boss Gt 10 Manual Download
  2. Boss Gt 100 Manual Pdf Portugues
  3. User Manual Pdf Download
  4. Instruction Manual
  5. Boss Gt 100 User Manual Pdf 2 10
Boss gt 100 user manual pdf online

Boss Gt 100 Manual Pdf Guitar. GT-10 Musical Instrument Amplifier pdf manual download. Musical Instrument Amplifier. Boss Audio Systems Music Pedal User Manual. GT-6 GT-6 Music Pedal pdf manual download. Though it managed a higher average g on the figure eight than the Boss 302 - which we'd still. Mar 24, 2019  For details of the audio signal flow when connected via USB and instructions on how to make settings, refer to “GT-1000 Parameter Guide” (PDF file). Refer to the instruction manual for the software you are using to 5 Transmit and receive digital audio signals between the learn how to switch the input source of the software. BOSS TONE CENTRAL is a library service offering additional contents for BOSS products. By simply launching the dedicated BOSS TONE STUDIO application and connecting to the internet, you can download any of the free contents from our growing collection.

Advertising

How to obtain a PDF of the owner’s manual

PDF files of the owner’s manual and supplementary material for this product can be obtained from the Roland website.

• GT-100 Owner’s Manual (this document)
• GT-100 Parameter Guide *

*These are not included with the product; you may download them as necessary.

Visit the following URL, choose “owner’s manuals,” and search for the model name “GT-100.“
http://www.roland.com/support/en/

Advertising
Table of contents
  • USING THE UNIT SAFELY
  • IMPORTANT NOTES
  • Main Features
  • Quick Guide
  • Panel Descriptions
    • Front Panel
    • About the Play Screen
    • Rear Panel (Connections)
  • Outputting Sounds
    • Switching the Unit On and Off
    • Adjusting the Output Level
    • Specifying the Output Device (Output Select)
    • Tuning the Guitar (TUNER)
    • Using the Metronome
    • Selecting a Tone (Patch Change)
      • How a Patch Is Structured
      • Using the Pedal to Select the Patch
      • Using the Knobs to Select a Patch
  • Creating Sounds (Effects)
    • Setting the Effects
    • Specifying the Divider and Mixer Modes
    • Using Amp Control
    • Using Send/Return
  • Saving a Tone
    • Saving a Patch (PATCH WRITE)
    • Exchanging Patches (PATCH EXCHANGE)
    • Initializing Patches (PATCH INITIALIZE)
    • Storing Settings by Effect (Quick Setting Write)
    • Copying or Swapping PREAMP Settings Between Channels
  • Phrase Loop Play
    • Setting Phrase Loop
  • Pedal Settings (Control/Expression)
    • Using Pedals to Control the Parameters
      • Assigning the ACCEL/CTL, EXP SW, SUB CTL1, and SUB CTL2 Functions
      • Assigning the EXP and SUB EXP Pedal Functions
    • Assigning the [1]–[8] Knob Functions in the Play Screen
    • Switching Settings with the Number Pedals
    • Adjusting the [EXP] pedal
    • Setting Each Pedal Functions to Individual Patches (Assign)
      • Virtual expression pedal system (Internal Pedal / Wave Pedal)
      • Input Level
  • Making Global Settings (System Settings)
    • List of Settings
      • Specifying the Output Device You’re Using (OUTPUT SELECT)
      • Adjusting the Input Level from Your Guitar
      • Adjusting the Overall Tone (Global EQ)
      • Adjusting the Overall Noise Suppressor, Reverb, and Output Level (Total)
      • Making Phrase Loop (p. 32) Settings
      • Making the PLAY OPTION Settings
      • Assigning the [1]–[8] Knob Functions in the Play Screen
      • Specifying Whether Settings Will Be Shared by All Patches
      • Adjusting the Contrast (Brightness) of the LCD Screen
      • Adjusting the [EXP] pedal
      • Auto Off Settings
      • Restoring the Factory Settings (Factory Reset)
    • USB-Related Settings
      • Setting the USB audio flow
      • Setting the MIX LEVEL
      • Setting the INPUT LEVEL
      • Setting the OUTPUT LEVEL
      • Setting the Direct Monitor
      • Controlling the Direct Monitor Setting from a Computer
    • MIDI-Related Settings
      • Setting the MIDI Receive Channel
      • Setting the MIDI Omni Mode
      • Setting the MIDI Transmit Channel
      • Setting the MIDI Device ID
      • Setting the MIDI Sync Clock
      • Selecting the Connector That Will Receive MIDI Messages
      • Sending Program Change Messages
      • Enabling/Disabling the Program Change Map Settings (MIDI Map Select)
      • Sending [PHRASE LOOP] Pedal Operations as Control Change Messages
      • Sending [ACCEL/CTL] Pedal Operations as Control Change Messages
      • Sending [EXP] Pedal Operations as Control Change Messages
      • Sending EXP Pedal Sw Operations as Control Change Messages
      • Sending External Footswitch Operations as Control Change Messages
      • Sending External Expression pedal Operations as Control Change Messages
      • Setting the Program Change Map
      • Transmitting Data to an External MIDI Device
  • Using the GT-100 with External MIDI Devices Connected
    • What Can You Do with MIDI?
      • Operating From the GT-100
      • Remotely Controlling the GT-100 Using an External MIDI Device
    • Setting the Program Change Map
    • Transmitting Data to an External MIDI Device (Bulk Dump)
      • Making Connections
      • Transmitting the Data
  • Using the GT-100 Connected to a Computer Via USB
    • Before Connecting with USB
      • Installing the USB Driver
      • Exchanging MIDI Messages between the Computer and the GT-100
      • Connecting the Computer
      • Receiving Bulk Data That Was Saved on the Computer
      • Transmitting/Receiving Audio Signals Between a Computer and the GT-100
  • Restoring the Factory Settings (Factory Reset)
  • Appendices
    • GT-100 Effects Guide
      • GT-100 Effects List
      • OD/DS Type List
      • Preamp Type List
      • FX1/FX2 Effects List
    • GT-100 Preset Patch List
    • Signal Flow
    • Troubleshooting
    • Error Messages
    • Main Specifications
  • Index
Popular Brands
Popular manuals

Report any errors on this page in the comment box below.

Boss Gt 10 Manual Download

PDF Content Summary: Owner’s Manual Provision of Bluetooth functionality Please be aware that depending on the country in which you purchased the unit, Bluetooth functionality might not be included. Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connecting the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Turning the Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Specify the Type of Amplifier You Have Connected . . . . . . . . . . 3 Using the Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tuner Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Selecting a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About the Play Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Editing: Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Basic Procedure for Effect Editing . . . . . . . . . . . . . . . . . . . . . . . . . 5 Effect Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Using Stomp Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Editing the Stomp Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Saving a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Editing: MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Basic MENU Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Assigning Favorite Parameters to [1]–[6] Knobs . . . . . . . 7 Adjusting the Contrast (Brightness) of the Display . . . . . 7 Restoring the Factory Default Settings (Factory Reset) . 7 Turning Off the Auto Off Function . . . . . . . . . . . . . . . . . . . 7 Using the Metronome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Installing the USB Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Using the GT-1000 as an Audio Interface . . . . . . . . . . . . . . . . . . 9 Owner’s Manual (this document) Read this first. It explains the basic things you need to know in order to use the GT-1000. PDF Manual (download from the Web) 5 Parameter Guide This explains all parameters of the GT-1000. 5 Sound List This is a list of the sounds built into the GT-1000. 5 MIDI Implementation This is detailed information about MIDI messages. Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaflet “USING THE UNIT SAFELY” and Owner’s Manual (p. 16)).After reading, keep the document(s) where it will be available for immediate reference. Connecting the GT-1000 with an External MIDI Device . . 9 Operations from the GT-1000 . . . . . . . . . . . . . . . . . . . . . . . 9 Operations from an External MIDI Device . . . . . . . . . . . . 9 Using the Bluetooth® Functionality . . . . . . . . . . . . . . . . . . . . . . 10 Here’s What You Can Do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connecting to an App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Foot Switch and Expression Pedal Settings . . . . . . . . . . . . . . . . . . . . . . . 11 Assigning a Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Making Assignments from the Effect Edit Screen (Quick Assign) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Adjusting the Expression Pedal (Pedal Calibration) . . . . 12 Connecting External Pedals . . . . . . . . . . . . . . . . . . . . . . . . 13 Looper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Loop Playback Level Setting . . . . . . . . . . . . . . . . . . . . . . . . 14 Switch Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Main Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 To obtain the PDF manual 1. Enter the following URL in your computer. http://www.boss.info/manuals/ I 2. Choose “GT-1000” as the product name. © 2018 Roland Corporation 2 Getting Ready Connecting the Equipment 1 5 Turn down the volume of the connected device. Turn on the power of the amp(s). OUTPUT jack Connect these to your guitar amp or mixer. If using a mono connection, use only the L/MONO jack. PHONES jack You can connect a set of headphones here. XLR OUT (L, R) jacks XLR OUT (L, R) jacks Connect these to your PA system, etc. Pin assignment of SUB OUTPUT connector/jack Connect these to your PA system, etc. Pin assignment of SUB OUTPUT connector/jack Connect your equipment to the OUTPUT jack(s). 3 Connect your guitar. INPUT jack Connect your guitar. Indicator 2 DC IN jack Connect the included AC adaptor here. Place the AC Turning the power on. 4 To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections. Before turning the unit on/off, always be sure to turn the volume down. Even with the volume turned down, you might hear some sound when switching the unit on/off. However, this is normal and does not indicate a malfunction. To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and to avoid applying undue stress to the jack, anchor the power cord using the cord hook, as shown in the illustration. 5 Use only the specified expression pedal. By connecting any other expression pedals, you risk causing malfunction and/or damage to the unit. You can also use the SEND (1, 2)/ RETURN (1, 2) jacks as SEND (L, R)/RETURN (L, R) jacks for connecting a stereo effect unit. For details on the parameter, refer to the “GT-1000 Parameter Guide” (PDF file). Connect an external effect processor here. Use a USB cable to connect to a computer and exchange audio/MIDI data between the GT-1000 and the computer (p. 9). Use a USB cable to connect to a computer and exchange audio/MIDI data between the GT-1000 and the computer (p. 9). CTL4, 5/EXP2 jacks, CTL6, 7/EXP3 jacks, AMP CTL 1, 2 jacks You can control various parameters by connecting an expression pedal (Roland EV-5: sold separately) or a footswitch (FS-5U, FS-6, FS-7: sold separately). For details on the settings, refer to “Foot Switch and Expression Pedal Settings” (p. 11). SEND (1, 2)/RETURN (1, 2) jacks AMP CTL 1,2 jacks By connecting this to the channel switching jack of your guitar amp, you can switch channels from the GT-1000. For details on the parameter, refer to the “GT-1000 Parameter Guide” (PDF file). USB COMPUTER port adaptor so the side with the indicator (see illustration) faces upwards and the side with textual information faces downwards. The indicator will light when you plug the AC adaptor into an AC outlet. MIDI IN/OUT jacks MIDI IN/OUT jacks Connect an external MIDI device here. (p. 9) Connect an external MIDI device here. (p. 9) Using the cord hookGround Terminal Getting Ready In this manual, the order of the MENU operations is written as follows. Press the [MENU] button. Use the [2] knob to select “IN/OUT SELECT.” Use the [1] knob to select “INPUT.”? Choose [MENU] 0 “IN/OUT” 0 “INPUT.” Turning the Power On Turn the power on in the order of steps 1 – 5 . To turn the power off, reverse the order. Specify the Type of Amplifier You Have Connected 1. Choose [MENU] 0 “IN/OUT SETTING” 0 “MAIN OUT” 0 “OUTPUT SELECT.” 2. Turn knob [1] to select the type of amp. For details on the amp types, refer to the “GT-1000 Parameter Guide” (PDF file). MEMO In order to take full advantage of the GT-1000’s capabilities, we recommend that you connect to an input that is not affected by a preamp; for example, you should connect to a RETURN jack rather than to a guitar input jack which is affected by the preamp of your guitar amp. Using the Tuner The GT-1000 is equipped with a conventional monophonic tuner which lets you tune your instrument one string at a time, and a polyphonic tuner which lets you play and tune all of your open strings simultaneously. The menu screen appears. The tuner screen appears. You can use the PAGE [K][J] buttons to switch the tuner display. Monophonic/polyphonic display Monophonic display Polyphonic display You can also start the tuner as follows. 1. Choose [MENU] 0 “TUNER.” “TUNER” is located in the second page of the menu. Use the PAGE [K] [J] buttons to access the second page. Tuner Settings To make tuner settings, use knobs [1]–[6] located below the display. Tuner settings Parameter Value Explanation [1] MODE NORMAL, STREAM Specifies the meter display method for the monophonic tuner. [3] Pitch 435–445 Hz (default: 440 Hz) Specifies the reference pitch. [4] OUTPUT MUTE Sound will not be output while tuning. BYPASS While tuning, the sound of the guitar being input to the GT-1000 will be output without change. All effects will be off. THRU Allows you to tune while hearing the current effect sound. Only for monophonic tuner. [5] TYPE 6-REGULAR, 6-DROP D, 7-REGULAR, 7-DROP A Selects the type of tuning for the polyphonic tuner. [6] OFFSET -5–-1 Adjusts the reference pitch of the polyphonic tuner in semitone units relative to standard tuning. 1. Press the [CTL3] (TUNER) switch. 3 4 Large patch number Large patch name Playing Selecting a Patch A combination of effects and their settings is called a “patch.” Patch User patch (U01-1–U50-5) Can be overwritten Preset patch (P01-1–P50-5) Cannot be overwritten, however, you can write a Preset patch into the User area, modify the settings to your needs and store your modified version in the User area. 1. Use the [BANKI] and [BANKH] switches to select a bank. 2. Use the [1]–[5] switches to select a patch within the selected bank. Patch name MEMO You can also change patches by turning knob [1] below the display. About the Play Screen The screen that appears after you turn on the power is called the “Play screen.” The following four types of play screen are provided; use the PAGE [K] [J] buttons to switch between the types of display. Bank Number Show effect configuration Show functions assigned to main unit and external switches Icons shown in the play screen Indicates the page to which you navigate using the PAGE [K][J] buttons (edit screen). Indicates the input level. Indicates the return level. Indicates the amount of compression when the compressor is operating. Indicates that the editor is connected wirelessly. Please be aware that depending on the country in which you purchased the unit, Bluetooth functionality might not be included. When the play screen is shown, you can turn knobs [1]–[6] to adjust the parameters that are shown above each knob. Areas which icons are displayed Indication Explanation MEMO You can change the parameters that are adjusted by knobs [1]– [6] when the play screen is shown. For details, refer to the “Assigning Favorite Parameters to [1]–[6] Knobs” (p. 7). , Indicates the output level. Blinks in time with the BPM. Indicates the send level. Indicates the BPM. Editing: Effects Basic Procedure for Effect Editing The edit screens show the block configuration (effect chain) of all effects provided by the GT-1000, as well as the output and send/ return. You can edit from this effect chain display by selecting the block that you want to edit. 1. Press the [EFFECT] button. 2. Turn knob [6] to select the block that you want to edit. On Off 3. Use knobs [1]–[5] to adjust the parameters that are shown below the screen. The edit screen (effect chain) appears. The selected block is enclosed by a thick frame. Use the PAGE [K][J] buttons to switch between the parameters that you want to edit. The current page is indicated in the lower center of the screen. The number of parameters and pages differs depending on the effect. By pressing knob [6] you can turn the selected effect on/off. Effects that are off are shown in gray. When the effect is turned on, it is shown in white. Editing while viewing all parameters From the edit screen, you can long-press knob [6] to see a list of all parameters of the selected block. You can edit the parameters from this list. Changing the placement of effects etc. The effect chain is shown. 2. Use knob [6] to select the block that you want to move. 3. While pressing knob [6], turn it left or right. Effect Placement 1. Press the [EFFECT] button. The selected block moves left or right. 1. Turn knobs [1]–[6] to edit the value of the parameters shown in the screen. Use the PAGE [K][J] buttons to switch between lists of parameters. Use the PAGE [K][J] buttons to switch By moving blocks such as effects, output, and send/return, you can freely change the order in which the effects are placed, or arrange them in parallel. 5 6Editing: Effects Switching patches without interrupting the sound The GT-1000 is equipped with a new type of high-speed patch switching system, allowing you to switch patches with minimal interruption of the sound. The fastest possible switching is automatically performed for each patch, and switching without interrupting the sound is also possible. Tips for preventing interruptions in the sound To prevent interruptions in the sound, observe the following points when you create the patches that are used before and after the switch. 5 Avoid changing the position of blocks within the chain. 5 Use multiple blocks when placing the effects (don’t change the TYPE within the same block). 5 Use parallel positioning, and switch the channel. Example: Switching from a clean sound that uses chorus and deep delay, to a crunch sound that uses phaser and shallow delay. AMP FX1 DLYAMP FX1 DLY1 CHO 1 1 CHO 1 AMP FX2 DLYAMP FX2 DLY2 PH 2 2 PH 2 Using Stomp Box Your preferred settings for each effect can be saved as a “stomp box.” You can select these saved settings and use them to create your sound just as though you were connecting compact pedal effects. The stomp box data is common to all patches; this means that all patches using the same stomp box can be edited simultaneously. 1. Press the [EFFECT] button. 2. Use the [6] knob to choose the effect you’re going to edit. 3. Use the PAGE [K][J] buttons to move to the last page. 4. Press the [5] knob. The stomp box select window appears. 5. Turn knob [5] to select the stomp box type. Editing the Stomp Box 1. Press the [5] knob. 2. Turn knobs [1]–[6] to edit the parameter value that are shown in the screen. Use the PAGE [K][J] buttons to switch between lists of parameters. 3. Use knob [1] to select the save-destination (U01-1–U50-5). You can use knobs [3]–[6] to edit the name. Editing a name To edit the patch name, use knob [6] to move the cursor and use knob [5] to change the character. Controller Operation Turn the [3] knob Selects the type of characters Press the [3] knob Delete one character (delete) Turn the [4] knob Switch uppercase/lowercase Press the [4] knob Insert one space (insert) Turn the [5] knob Changes the character Turn the [6] knob Moves the cursor 4. Press the [WRITE] button once again. The patch is written. Saving a Patch When you want to save a patch you have created, save it as a user patch by following the procedure below. If you do not save the patch, the edited settings will be lost when you turn off the power or switch to another patch. 1. Press the [WRITE] button. 2. Press knob [1] to select “WRITE” (PATCH WRITE). Editing: MENU Basic MENU Operations Here you can make settings that are common to the entire GT-1000 (system parameters). For details on the parameter, refer to the “GT-1000 Parameter Guide” (PDF file). 1. Press the [MENU] button. 2. Press a knob [1]–[6] to select the item that you want to edit. A sub-menu appears. 3. Once again press a knob [1]–[6] to select the item that you want to edit. 4. Use knobs [1]–[6] to select parameters or edit the values. The method of selecting parameters or editing values differs depending on the item. For details, refer to “GT-1000 Parameter Guide” (PDF). Assigning Favorite Parameters to [1]–[6] Knobs Here's how to assign the parameters that are controlled by knobs [1]– [6] when the play screen (p. 4) is shown. 1. Choose [MENU] 0 “HARDWARE SETTING” 0 “KNOB.” 2. Use the [1]–[6] knobs to specify the parameters to be controlled by each knob. 3. Press the [EXIT] button a number of times to return to the play screen. Adjusting the Contrast (Brightness) of the Display You can adjust the brightness of the display. 1. Choose [MENU] 0 “HARDWARE SETTING” 0 “OTHER” 0 “LCD CONTRAST.” 2. Adjust the value with the [1] knob. Restoring the Factory Default Settings (Factory Reset) Restoring the GT-1000’s settings to their original factory default settings is referred to as “Factory Reset.” Not only can you return all of the settings to the values in effect when the GT-1000 was shipped from the factory, you can also specify the items to be reset. When you execute “Factory Reset,” the settings you made will be lost. Save the data you need to your computer using the dedicated software. 1. Choose [MENU] 0 “FACTORY RESET.” 2. Choose the type of settings to be restored to the factory default settings with knobs [1] and [6]. Knob Parameter Value Explanation [1] [6] FROM SYSTEM TO System parameter settings U01-1– Settings for Patch Numbers U50-5 U01-1-5–U50-5 3. Press the [WRITE] button. If you decide not to execute factory reset, press the [EXIT] button. Once the Factory Reset is complete, you are returned to the Play screen. Turning Off the Auto Off Function The GT-1000 can turn off its power automatically. The power will turn off automatically when 10 hours have passed since you last played or operated the unit. The display will show a message approximately 15 minutes before the power turns off. With the factory settings, this function is turned “ON” (power-off in 10 hours). If you want to have the power remain on all the time, turn it “OFF.” 1. Choose [MENU] 0 “HARDWARE SETTING” 0 “OTHER.” 2. Use the [1] knob to select “OFF.” Press the [EXIT] button a number of times. 7 8Editing: MENU Using the Metronome 1. Choose [MENU] 0 “METRONOME.” “METRONOME” is located in the second page of the menu. Use the PAGE [K][J] buttons to access the second page. Metronome display Metronome settings Use knobs [1]–[6] below the display to make metronome settings. Parameter Value Explanation [1] EFFECT TEMPO 40–250 Changes to the tempo that’s specified for the effect. [2] TEMPO 40–250 Specifies the tempo. [3] BEAT 1/1–8/1, 1/2–8/2, 1/4–8/4, 1/8–8/8 Specifies the time signature. [5] OFF/ON OFF, ON Turns the metronome on/off. [6] LEVEL 0–100 Specifies the volume of the metronome. Connecting to a Computer By connecting the GT-1000 to a computer via USB, you can do the following. USB port Using the GT-1000 as an Audio Interface You can record the sound of the GT-1000 on your computer, or have sound from your computer be output from the OUTPUT jacks. For details of the audio signal flow when connected via USB and instructions on how to make settings, refer to “GT-1000 Parameter Guide” (PDF file). Refer to the instruction manual for the software you are using to 5 Transmit and receive digital audio signals between the learn how to switch the input source of the software. computer and the GT-1000 5 Edit and manage patches, and display the “GT-1000 Parameter Making use of the GT-1000's dedicated software Guide” (PDF file) on a computer using the dedicated software 5 Download patches from our dedicated BOSS TONE CENTRAL website & http://bosstonecentral.com/ You can easily download dedicated software from our BOSS TONE CENTRAL website. For details on how to use the software, refer to the Readme.htm file that comes with the download. & http://bosstonecentral.com/ Installing the USB Driver Using the dedicated software allows you to do the following: 5 Easily download patches from our BOSS TONE CENTRAL website. 5 Edit patch settings You must install the USB driver before connecting to a computer. 5 Name patches Please download the USB driver from the website shown below. 5 Organize patches in order and switch them around Install this special driver before making a USB connection. For further details, refer to the Readme.htm file that comes with the download. 5 Back up patches and system settings, and return to the backed up settings & http://www.boss.info/support/ The program you need to use, and the steps you need to take to install the USB driver will differ depending on your computer setup, so 5 Display the “GT-1000 Parameter Guide” (PDF file) on your computer please carefully read and refer to the Readme.htm file that comes with the download. Connecting the GT-1000 with an External MIDI Device On the GT-1000, you can use MIDI to perform the following operations. Operations from the GT-1000 Operation Explanation Transmit program change messages Connection example OUT IN INOUT When you select a patch on the GT-1000, a program change message corresponding to the patch number you select is transmitted. The external MIDI device that receives this program change message will switch to the corresponding settings. Transmit control change messages Operations of a [CTL] switches, or a footswitch or expression pedal connected to the EXP/CTL 4, 5 jack, are transmitted as control change messages. These messages can control parameters on an external MIDI device. Operations from an External MIDI Device Operation Explanation Switch patch numbers When the GT-1000 receives a program change message from an external MIDI device, the GT-1000 will change patches. Receive control change messages The GT-1000 can receive control change messages to control a specified parameter while you perform. Receive data The GT-1000 can receive data that is transmitted from another GT-1000 unit, or data that was saved on a MIDI sequencer. Settings 1. Choose [MENU] 0 “MIDI.” 2. Use [1]–[6] knobs to specify the value of each parameter. For details on MIDI, refer to “GT-1000 Parameter Guide)” (PDF file). GT-1000 External MIDI device 9 10 Using the Bluetooth® Functionality Provision of Bluetooth functionality Please be aware that depending on the country in which you purchased the unit, Bluetooth functionality might not be included. Here’s What You Can Do Bluetooth functionality creates a wireless connection between a mobile device such as a smartphone or tablet (subsequently referred to as the “mobile device”) and this unit, allowing you to do the following. 5 You can use the BOSS TONE STUDIO app to edit the sound or edit the sound library. For details on BOSS TONE STUDIO, refer to the Boss website. https://www.boss.info/ Connecting to an App The following steps are one possible example. For details, refer to the owner’s manual of your mobile device. 1. Power-on the GT-1000. 2. Place the mobile device that you want to connect near the GT-1000. 1. Choose [MENU] 0 “HARDWARE SETTING” 0 “OTHER” 0 “BLUETOOTH SW.” 2. Turn on the Bluetooth function of the mobile device. 3. In the Bluetooth device screen of your mobile device, tap “GT-1000.” The GT-1000 is connected to your mobile device. When connection is successful, “GT-1000” is added to the list of your mobile device’s “Paired devices.” If you have multiple GT-1000 units If you set the Bluetooth ID parameter to something other than “Off,” a number is added following the device name of the GT-1000. This lets you distinguish multiple GT-1000 units. 1. Choose [MENU] 0 “HARDWARE SETTING” 0 “OTHER” 0 “BLUETOOTH ID.” 2. Turn knob [1] to specify the ID. Value Example Off, 1–9 Off (default) “GT-1000” 1 “GT-1000 1” Built-in footswitches EXP1 Assigning a Function 1. Choose [MENU] 0 “CONTROL ASSIGN” 0 “CONTROL FUNCTION.” 2. Turn knob [1] to select the item that you want to set. Turning the knob will move the selected item vertically. The settings of the selected item can now be edited. 3. Turn knobs [2]–[6] to edit the value of the item selected for each switch. You can also access the assign matrix setting screen in the same way from the all-parameter list screen (p. 5). You can also access it by selecting [MENU] 0 ”CONTROL ASSIGN” 0 ”ASSIGN SETTING.” 4. Turn knob [1] to select a setting item. Foot Switch and Expression Pedal Settings A variety of functions can be assigned each of the top panel footswitches, the expression pedal (EXP1), and expression pedals or footswitches that are connected to the rear panel CTL4, 5/EXP2 jack and CTL6, 7/EXP3 jack (p. 13). CTL4 – CTL7 EXP2, EXP3 Making Assignments from the Effect Edit Screen (Quick Assign) In the effect edit screen (p. 5), you can select an effect parameter and assign that parameter to the switch of your choice. 1. Press the [EFFECT] button. 2. Turn knob [6] to select the block that you want to edit. 3. Long-press the knob [1]–[5] for the parameter that you want to assign. Turning the knob will move the selected item vertically. 5. Turn knobs [2]–[6] to edit the value of the selected item for each switch. The assign matrix setting screen appears. 11 12Foot Switch and Expression Pedal Settings Adjusting the Expression Pedal (Pedal Calibration) Although the GT-1000's expression pedal has been set for optimum operation at the factory, extended use and the operating environment can result in the pedal going out of adjustment. If you encounter problems such as being unable to fully cut off the sound with the volume pedal or being unable to switch the PEDAL FX, you can use the following procedure to readjust the pedal. 1. Choose [MENU] 0 “HARDWARE SETTING” 0 “CALIBRATION.” The PEDAL CALIBRATION screen appears. 2. Press the heel end of the pedal, and press the [WRITE] button. The screen will indicate “OK,” and then a screen like the following will appear. 3. Press the toe end of the pedal, and press the [WRITE] button. The screen will indicate “OK,” and then a screen like the following will appear. 4. Strongly press the toe end of the pedal. Verify that the PEDAL FX indicator lights when you strongly press the toe end. If you want to change the lighting sensitivity of the PEDAL FX indicator, repeat step 4 while you adjust the THRESHOLD value with knob [3]. 5. Press the [WRITE] button. The screen will indicate “COMPLETED!” When you operate the expression pedal, please be careful not to get your fingers pinched between the movable part and the panel. In places where small children are present, make sure that an adult provides supervision and guidance. Foot Switch and Expression Pedal Settings Connecting External Pedals MODE/POLARITY switch FS-5U FS-6 FS-7 EXP 2 EXP 3 FS-5U x 2 Stereo 1/4” phone type ./ 1/4” phone type x 2 FS-5U x 1 1/4” phone type ./ 1/4” phone type 1/4” phone type ./ 1/4” phone type 1/4” phone type ./ 1/4” phone type FS-6 FS-6 Stereo 1/4” phone type ./ Stereo 1/4” phone type Stereo 1/4” phone type ./ Stereo 1/4” phone type Stereo 1/4” phone type ./ Stereo 1/4” phone type Stereo 1/4” phone type ./ Stereo 1/4” phone type Stereo 1/4” phone type ./ Stereo 1/4” phone type Stereo 1/4” phone type ./ Stereo 1/4” phone type Stereo 1/4” phone type ./ Stereo 1/4” phone type Stereo 1/4” phone type ./ Stereo 1/4” phone type Stereo 1/4” phone type ./ Stereo 1/4” phone type FS-7 FS-7 FS-7 TIP RING CTL 5 CTL 4 CTL 4 CTL 5 CTL 5 CTL 4 CTL 4 CTL 4 CTL 5 CTL 7 CTL 4 CTL 4 CTL 4 CTL 4 CTL 7 CTL 6 CTL 6 CTL 6 CTL 7 CTL 7 CTL 7 CTL 6 CTL 6 CTL 6 CTL 6 CTL 6 CTL 6 CTL 6 CTL 6 CTL 6 13 14 Loop Playback Level Setting If you set the playback level at 100 (default value), the volume of the performance and that of the loop playback will be identical. If you set the playback level to a value lower than 100, the volume of the playback will be lower than that of the performance. As a result, the sound of the performance won’t get buried by the loop playback sound, even if you record a multiple number of times. 1. Press the [EFFECT] button. 2. Turn knob [6] to select LOOPER. 3. Turn knob [1] to specify the “PLAY LEVEL” value. Looper Switch Color Color Status Red Record Orange Overdub Green Playback Green (blink) Stopped (phrase exists) Blue Stopped (no phrase) Looper or turn off the power. You can record up to 38 seconds (MONO) of a performance and play back the recorded section over and over. You can also layer additional performances with the recording as it plays back (overdubbing). This lets you create real-time backing performances on the fly. When the play screen (p. 4) is shown, pressing the [1]–[5] switch of the currently selected patch number (example: for U01-1, switch [1]; for U01-5, switch [5]) turns the looper on. The same switch is used for all looper operations. Record Recording will start immediately when you press the switch. At the point where you want to loop, press the pedal to switch to playback. Loop Playback Play back the loop. Pressing the switch will switch to overdubbing. MEMO 5 The recording time is up to 38 seconds (MONO). 5 The recorded content will be lost when you turn off the Overdub Overdub Record additional layers while playing back the loop. Press the switch to switch to playback. Record additional layers while playing back the loop. Press the switch to switch to playback. Press Twice Stop/Clear To stop, press the switch twice. To clear the phrase, hold down the switch for at least two seconds while stopped. Main Specifications BOSS GT-1000: Guitar Effects Processor Sampling Frequency 96 kHz AD Conversion 32 bits + AF method AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to- noise (SN) ratio of the AD and DA converters. DA Conversion 32 bits Patches 250 (User) + 250 (Preset) Phrase Loop 38 sec. Nominal Input Level INPUT: -10 dBu RETURN1: -10 dBu RETURN1: -10 dBu Maximum Input Level INPUT: +18 dBu RETURN1: +8 dBu RETURN1: +8 dBu Input Impedance INPUT: 1 M Ω RETURN1: 1 M Ω RETURN2: 1 M Ω Nominal Output Level MAIN OUTPUT (L/MONO, R): -10 dBu SUB OUTPUT (L, R): +4 dBu PHONES: -10 dBu SEND1: -10 dBu SEND2: -10 dBu Output Impedance MAIN OUTPUT (L/MONO, R): 1 k Ω SUB OUTPUT (L, R): 600 Ω PHONES: 20 Ω SEND1: 1 k Ω SEND2: 1 k Ω Recommended Load Impedance MAIN OUTPUT (L/MONO, R): 10 k Ω or greater SUB OUTPUT (L, R): 600 Ω or greater PHONES: 44 Ω or greater SEND1: 10 k Ω or greater SEND2: 10 k Ω or greater Display Graphic LCD (512 x 160 dots, backlit LCD) Connectors INPUT jack: 1/4-inch phone type MAIN OUTPUT (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type SUB OUTPUT (L, R) connectors: XLR type PHONES jack: Stereo 1/4-inch phone type CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4- inch TRS phone type USB O port: USB type B DC IN jack MIDI (IN, OUT) connectors Power Supply AC adaptor Current Draw 1.2 A Dimensions 462 (W) x 248 (D) x 70 (H) mm 18-3/16 (W) x 9-13/16 (D) x 2-13/16 (H) inches Maximum height: 462 (W) x 248 (D) x 95 (H) mm 18-3/16 (W) x 9-13/16 (D) x 3-3/4 (H) inches Weight 3.6 kg 7 lbs 15 oz Accessories AC adaptor, Owner’s Manual, Leaflet “USING THE UNIT SAFELY” Options (sold separately) Footswitch: FS-5U, FS-5L, FS-6, FS-7, Expression Pedal: EV-30, FV-500L/500H, Roland EV-5 0 dBu = 0.775 Vrm * This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website. 15 16 USING THE UNIT SAFELY WARNING Concerning the Auto Off function The power to this unit will be turned off automatically after a predetermined amount of time has passed since it was last used for playing music, or its buttons or controls were operated (Auto Off function). If you do not want the power to be turned off automatically, disengage the Auto Off function (p. 7). Use only the supplied AC adaptor and the correct voltage Be sure to use only the AC adaptor supplied with the unit. Also, make sure the line voltage at the installation matches the input voltage specified on the AC adaptor’s body. Other AC adaptors may use a different polarity, or be designed for a different voltage, so their use could result in damage, malfunction, or electric shock. Use only the supplied power cord Use only the attached power cord. Also, the supplied power cord must not be used with any other device. CAUTION Take care so as not to get fingers pinched When handling the following moving parts, take care so as not to get fingers, toes, etc., pinched. Whenever a child uses the unit, an adult should be on hand to provide supervision and guidance. • Expression pedal (p. 11) Handle the ground terminal carefully If you remove the screw from the ground terminal, be sure to replace it; don’t leave it lying around where it could accidentally be swallowed by small children. When refastening the screw, make that it is firmly fastened, so it won’t come loose. IMPORTANT NOTES Placement • Depending on the material and temperature of the surface on which you place the unit, its rubber feet may discolor or mar the surface. Repairs and Data • Before sending the unit away for repairs, be sure to make a backup of the data stored within it; or you may prefer to write down the needed information. Although we will do our utmost to preserve the data stored in your unit when we carry out repairs, in some cases, such as when the memory section is physically damaged, restoration of the stored content may be impossible. Roland assumes no liability concerning the restoration of any stored content that has been lost. About the Ground Terminal • If you are using the ground terminal, connect it with an external ground. When the unit is grounded, a slight hum may occur, depending on the particulars of your installation. If you are unsure of the connection method, contact the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page. • Unsuitable places for connection • Water pipes (may result in shock or electrocution) • Gas pipes (may result in fire or explosion) • Telephone-line ground or lightning rod (may be dangerous in the event of lightning) Additional Precautions • Any data stored within the unit can be lost as the result of equipment failure, incorrect operation, etc. To protect yourself against the irretrievable loss of data, try to make a habit of creating regular backups of the data you’ve stored in the unit. • Roland assumes no liability concerning the restoration of any stored content that has been lost. • Never strike or apply strong pressure to the display. • Use only the specified expression pedal. By connecting any other expression pedals, you risk causing malfunction and/or damage to the unit. Caution Regarding Radio Frequency Emissions • The following actions may subject you to penalty of law. • Disassembling or modifying this device. • Removing the certification label affixed to the back of this device. Intellectual Property Right • It is forbidden by law to make an audio recording, video recording, copy or revision of a third party’s copyrighted work (musical work, video work, broadcast, live performance, or other work), whether in whole or in part, and distribute, sell, lease, perform or broadcast it without the permission of the copyright owner. • Do not use this product for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this product. • Roland and BOSS are either registered trademarks or trademarks of Roland Corporation in the United States and/or other countries. • ASIO is a trademark and software of Steinberg Media Technologies GmbH. • This product contains eParts integrated software platform of eSOL Co.,Ltd. eParts is a trademark of eSOL Co., Ltd. in Japan. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Roland is under license. • This Product uses the Source Code of μT-Kernel under T-License 2.0 granted by the T-Engine Forum (www.tron.org). • Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.

Boss Gt 100 Manual Pdf Portugues

FREE ENGLISH PDF

User Manual Pdf Download

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

Instruction Manual

REFERENCE GUIDE - REFERENCE MANUAL

Boss Gt 100 User Manual Pdf 2 10

INSTRUCTION GUIDE - INSTRUCTION MANUAL